Collaborative post – may contain affiliate links
The hurling and smashing of metals, the crushing of molecules and the heat and cold are all things you’ll find in any manufacturing plant. The forces that are in a small business space such as production line are staggering. This is why safety in the industry is always being improved without fail or slowing down. Your employees are under a lot of pressure to make sure their skills are at their best and they are creating the products you want. However they are also under pressure from pressure, i.e. the tools that they use are often very sensitive and very pent up. What this means for them is that they need to keep a sharp eye open, make sure that their tools are not exhibiting signs of excessive wear and tear. After all their lives are on the line which makes it very important that you as the business owner are managing pressure in the tools themselves.
Lazing up the heat
One of the hottest pieces of equipment in any manufacturing plant are the drills. Drills are doing two things at once whereby they are revolving at many high rpms but they’re also forcing their power down into and through something else. This means that immense amount of heat will amount in the drill piece and in the material which is being drilled. For that reason you need to buy a laser heat reader which shoots a beam into solid objects and can give you accurate temperatures. Most industrial drills have heat thresholds that are clearly fitted to the sides of written in the manual. So you can reference the laser reader and the heat loads to avoid pieces of the drill cracking or even blowing up.
Cooling down pieces
It’s common for manufacturing plants to use pressure hoses to cool down equipment. However some pieces of equipment actually have water cooling system built inside them. They also have the ability to increase pressure to keep up with the intensity of the work that’s being done. For that you factory or plant will need to fit water pipes near the production line. However since they are not inherent in the building structure, they will be a little weaker. To combat pressure build up and weak points, you can fit pipe fittings such as a galvanized pipe joint which is extra rigid. These can be fitted to the areas where the pipe is coming out from underneath the ground or where the water is being pumped in.
One of the most common of all tools in manufacturing is the hydraulic press or stamp. It’s a basic tool to use when you’re trying to crush something into a design or flatten a piece of metal sheet out. Fitting rubber sleeves to the pipes can avoid direct blunt impact damage to them. In turn, they will last longer and suffer from less entrance pressures too.
Pressure is a fantastic force that manufacturing plants harness to their advantage. However it’s just a moment away from going wrong so begin managing it in different ways for each equipment or tool.